Modular Shuttle Lock with
4-Hole Housing

from Fillauer LLC

The lock system widely used today was originally invented in 1983 by Carlton Fillauer. The same basic design is still used today and considered the standard in suspension systems.

  • Rated up to 300 lbs.
Shuttle Lock Assembly

Shuttle Lock Assembly

125461 4-Hole Shuttle Lock, without Plunger

Includes

809792 4-Hole Shuttle Housing
809782 Shuttle Body
809711 Shuttle Lock
809784 Button Shield
809739 Latch Pin
809785 Latch Pin Button
809756 Compression Spring
809783 Guide Screw
880033 6-32 x 5/16 in. Socket Head Set Screw
809787 Pe-Liteā„¢ Washer
880282 Screw M6 x 1 x 20 mm
Fabrication Kit

Fabrication Kit for Lamination

125204 Fabrication Kit

Includes

809790 Shuttle Body Dummy
809791 Button Shield Dummy
880494 5/16-18 x 3 in. Socket Head Set Screw
809794 Flattening Plate
882610 M6 x 10 Socket Set Screw (4 Each)
885215 Nut 5/16 - 18 Acorn
809798 Jam Screw
809799 Jack Screw
Fabrication Kit

Fabrication Kit for Thermoforming

125202 Fabrication Kit

Includes

809790 Shuttle Body Dummy
809791 Button Shield Dummy
880494 5/16-18 x 3 in. Socket Head Set Screw
809793 Flattening Plate
882610 M6 x 10 Socket Set Screw (4 Each)
809800 Camlock Assembly
809801 Hole Punch

Plungers (Sold Separately)

Plungers
809722 Plunger 1 in., with 1/4-20 Thread
809725 Plunger 1-1/2, with 1/4-20 Thread
809727 Plunger 2 in., with 1/4-20 Thread
809722mm Plunger 1 in., with M10 Metric Thread
809725mm Plunger 1-1/2, with M10 Metric Thread
809727mm Plunger 2 in., with M10 Metric Thread
809720mm Plunger 2-1/2 in., with M10 Metric Thread
809721mm Plunger 3 in., with M10 Metric Thread

For more information and ordering, email Customer Service or call 1-800-251-6398.