Modular Shuttle Lock with Cylindrical Housing

from Fillauer LLC

The lock system widely used today was originally invented in 1983 by Carlton Fillauer. The same basic design is still used today and considered the standard in suspension systems.

  • Rated up to 300 lbs.
Shuttle Lock Assembly

Shuttle Lock Assembly

125462 Cylindrical Housing Shuttle Lock, without Plunger

Includes

809860 Cylindrical Housing
809782 Shuttle Body
809784 Button Shield
809783 Guide Screw
809739 Latch Pin
809785 Latch Pin Button
809711 Shuttle Lock
809756 Compression Spring
880033 6-32 x 5/16 in. Socket Head Set Screw
809787 Pe-Liteā„¢ Washer
Shuttle Lock Sub Assembly

Shuttle Lock Sub Assembly

809746 Shuttle Lock Sub Asembly

Includes

809782 Shuttle Body
809711 Shuttle Lock
809756 Compression Spring
880033 6-32 x 5/16 in. Socket Head Set Screw
Fabrication Kit

Fabrication Kit (Thermoforming and Lamination)

809866 Cylindrical Housing Dummy Kit

Includes

809865 Fabrication Dummy Kit
880275 M6 x 1 x 16MM Socket Head Set Screw Cone Point
880494 5/16-18 x 3 in. Socket Head Set Screw

 

Also may use fabrication kits 125204 and 125202 with this item

Plungers (Sold Separately)

Plungers
809722 Plunger 1 in., with 1/4-20 Thread
809725 Plunger 1-1/2, with 1/4-20 Thread
809727 Plunger 2 in., with 1/4-20 Thread
809722mm Plunger 1 in., with M10 Metric Thread
809725mm Plunger 1-1/2, with M10 Metric Thread
809727mm Plunger 2 in., with M10 Metric Thread
809720mm Plunger 2-1/2 in., with M10 Metric Thread
809721mm Plunger 3 in., with M10 Metric Thread

For more information and ordering, email Customer Service or call 1-800-251-6398.