Trautman Mobile Vacuum Unit

  • Sturdy steel frame with casters and wood top
  • Multifunction table top for:
    1. Pipe-mounted platens, height adjustable
    2. Vacuum forming directly on table top
    3. Pipe-holding fixture for horizontal vacuum forming
  • Master cut-off valve and three-way valve
    1. Neutral (off) position
    2. High vac line-full vacuum direct from vacuum source
    3. Low vac line-controlled by regulator
  • On-off foot operated valve
  • Filter and water trap (wet plaster models release 4-6 oz. of water which could contaminate regulator, gauges, and pump)
  • Two six gallon surge tanks
227305 Mobile Vacuum Unit

Includes

  227503 Surge Tanks
  227511 Master Cut-Off Valve
  227529 Three-Way Valve
  227537 Regulator
  227545 Gauge
  227552 Filter-Water Trap
  227560 On-Off Foot Control

Note: Pump is sold separately

Trautman Mobile Vacuum Unit

Downloads

Product Manual

Portable Vacuum Pump

  • 1/4 Horse Power motor is permanently lubricated
  • Enough power to operate two Vacuum Laminating Jigs simultaneously
  • Four cubic feet per minute capacity
  • Adjustable vacuum from 3 in. to 27 in. of mercury
  • Gauge, regulator, filter, hoses, and overflow traps included
  • Standard 110/115 volt 50/60 Hz Single Phase Motor *
  • 110 V Standard Plug and On/Off Switch
  • Motor may be wired for 220 Volt use
51277 Portable Vacuum Pump, 110 Volt*
Portable Vacuum Pump

Oilless Portable Vacuum Pump

  • 1/3 Horse Power oilless motor
  • Enough power to operate two Vacuum Laminating Jigs simultaneously
  • Four cubic feet per minute capacity
  • Adjustable vacuum from 3 in. to 27 in. of mercury
  • Standard 110/115 volt 50/60 Hz Single Phase Motor *
  • 110 V Standard Plug and On/Off Switch
  • Motor may be wired for 220 Volt use
  • Available in single and dual vacuum
  • Reversible to become air supply as well as vacuum
227005 Portable Oilless Vacuum Pump, 115V
227020 Portable Dual Oilless Vacuum Pump, 115V
Oilless Portable Vacuum Pump

Portable Oilless Vacuum Pump – 227005

Vacuum Control Assembly

Vacuum Control Assembly

227500 Vacuum Control Assembly

Includes

  227511 Master Cut-Off Valve
  227529 Three-Way Valve
  227537 Regulator
  227545 Gauge
  227552 Filter-Water Trap

Note: On-Off Foot Control 227560 optional but recommended

Drape Forming Adapters

Drape Forming Adapters

227497 Drape Forming Adapter, Straight
227495 Drape Forming Adapter, Angled
Holding Frames

Holding Frames

  • Sold per pair
227420 Holding Frames, 12 in. x 12 in.
227438 Holding Frames, 16 in. x 16 in.
227443 Holding Frames, 18 in. x 18 in.
227449 Holding Frames, 20 in. x 20 in.
227450 Holding Frames, 22 in. x 22 in.
227451 Holding Frames, 24 in. x 24 in.

Trautman Equipment Warranty

  • 12 Months from the date of shipment

Trautman Equipment and Equipment accessories are warranted for manufacturing defects for 12 months from the date of shipment from the Fillauer warehouse or from an authorized Fillauer distributor. Items will be replaced or repaired at Fillauer's discretion at no charge to the customer (See Trautman Warranty Repair/Replacement Procedure and Agreement). The warranty will be void if the item has been modified, abused, or used outside of Fillauer's recommendations.

For more information and ordering, email Customer Service or call 1-800-251-6398.