Multi Activity Feet
Multi Activity Feet
Explore our range of multi-activity prosthetic feet, designed for dynamic and stable movement across all levels of activity.
Aeris Performance 2
The Aeris Performance 2 adds Compliant Composite Technology (CCT) that is derived by using multiple springs to increase the range of flexibility. The result is a unique Advanced Energy Release (AER) pylon design composed of nested parallel springs that enable the foot to react in a compliant manner at heel strike and then work together to create a dynamic transition from push-off to toe release. The AER pylon takes advantage of independent spring action to provide smooth, stable progression while increasing the axial rotation which minimizes the forces transmitted to the residual limb.
Suggested L-Codes
L5981
PDAC Approved
Suggested L-Codes are provided as a reference only. It is the responsibility of the practitioner and/or patient care facility submitting this claim to determine and submit the correct coding within all established rules and guidelines.
Features
-
Advanced Energy Release (AER) pylon
-
Split pylon for increased multi-axial performance
-
Enhanced plantar flexion for stability at heel strike
-
Smooth transitions from foot-flat to toe-off
-
Simple, maintenance-free design ensures long-term worry-free use
Featured Specifications
Functional Level
K3, K4
Pyramid (mm)
30
Mount
Ti Pyramid
Patient Weight Maximum
330 lbs. (150 kg)
Weight
17.6 oz. (500 g)
Build Height
6.5 – 7.3 in. (166 – 185 mm)
Heel Height
0.4 in. (10 mm.)
Ordering Information
Foot shell sold separately (see below).The foot model recommendations on the selection chart are based on average patients, engaged in normal activities. If your patient is more active than average or lifts heavy loads as part of a daily routine, then selecting the next weight category higher is advised.
Warranty
-
3 years from date of patient fitting
-
60-day patient trial from date of patient fitting
-
Foot Shell: 6 months from date of patient fitting
The Aeris Performance 2 has been designed and manufactured for specific patient weights. Failure to follow the weight guidelines and/or overload conditions caused by the patient, such as heavy lifting, high impact sports, or abusive activities, that would otherwise damage the natural limb, may void the warranty.
Foot Shell
Additional Specifications
Patient Weight Minimum: 100 lbs. (45 kg)
Resources
Stay up to date with new products and accessories.
Aeris Performance LP
The Aeris Performance adds Compliant Composite Technology (CCT) that is derived by using multiple springs to increase the range of flexibility. The result is a unique Advanced Energy Release (AER) pylon design composed of nested parallel springs that enable the foot to react in a compliant manner at heel strike and then work together to create a dynamic transition from push-off to toe release. The AER pylon takes advantage of independent spring action to provide smooth, stable progression from heel-strike to toe-off. The Aeris Performance LP foot system will exceed expectations for the low to moderate activity user.
Suggested L-Codes
L5981, L5986
Suggested L-Codes are provided as a reference only. It is the responsibility of the practitioner and/or patient care facility submitting this claim to determine and submit the correct coding within all established rules and guidelines.
Features
-
Increased axial rotation via dual-spring pylon
-
At heel strike, dual-springs open to enhance plantarflexion
-
After foot-flat, dual-springs close and support each other to provide a smooth transition, balance of stability and dynamic response
-
Advanced Energy Release (AER) Pylon
Featured Specifications
Functional Level
K3
Pyramid (mm)
30
Mount
Ti Pyramid
Patient Weight Maximum
275 lbs. (125 kg)
Weight
16 oz. (450 g)
Heel Height
0.4 in. (10 mm.)
Ordering Information
Foot shell sold separately (see below). The foot model recommendations on the selection chart are based on average patients, engaged in normal activities. If your patient is more active than average or lifts heavy loads as part of a daily routine, then selecting the next weight category higher is advised.
Warranty
-
3 years from date of patient fitting
-
60-day patient trial from date of patient fitting
-
Foot Shell: 6 months from date of patient fitting
The Aeris Performance LP has been designed and manufactured for specific patient weights. Failure to follow the weight guidelines and/or overload conditions caused by the patient, such as heavy lifting, high impact sports, or abusive activities, that would otherwise damage the natural limb, may void the warranty.
Foot Shell
Additional Specifications
Patient Weight Minimum: 100 lbs. (45 kg)
Resources
Stay up to date with new products and accessories.
Wave Comfort 3
The Wave Comfort 3 brings an exceptional level of comfort to the low to moderate activity user.
Suggested L-Codes
L5981, L5986
Suggested L-Codes are provided as a reference only. It is the responsibility of the practitioner and/or patient care facility submitting this claim to determine and submit the correct coding within all established rules and guidelines.
Features
-
Exceptional level of comfort for the low to moderate activity user
-
Shock absorption when walking and standing
-
Smooth rollover and enhanced plantarflexion for early stance phase stability
-
Adjustable heel stiffness with replaceable bumper
Featured Specifications
Functional Level
K3
Pyramid (mm)
30
Sizes
22 – 30 cm
Mount
Ti Pyramid
Patient Weight Maximum
330 lbs. (150 kg)
Weight
13.2 oz. (374 g)
Build Height
3.7 – 4.0 in. (95 – 102 mm)
Heel Height
0.4 in. (10 mm.)
Ordering Information
Foot shell sold separately (see below).The foot model recommendations on the selection chart are based on average patients, engaged in normal activities. If your patient is more active than average or lifts heavy loads as part of a daily routine, then selecting the next weight category higher is advised.
Warranty
-
3 years from date of patient fitting
-
60-day patient trial from date of patient fitting
-
Foot Shell: 6 months from date of patient fitting
The Wave Comfort 3 has been designed and manufactured for specific patient weights. Failure to follow the weight guidelines and/or overload conditions caused by the patient, such as heavy lifting, high impact sports, or abusive activities, that would otherwise damage the natural limb, may void the warranty.
ProCover
Foot Shell
Additional Specifications
Patient Weight Minimum: 97 lbs. (44 kg)
Resources
Stay up to date with new products and accessories.
Ibex XD
The innovative micro-slices in the Ibex pylon and the split heel plate provide controlled inversion/eversion for uneven terrain. The multi-axial design is energy optimized with a long carbon pylon and full length heel plate that allows the Ibex to reach foot flat sooner and store more energy. The unique components of the Ibex work together from heel strike to toe off to provide stability without sacrificing energy return. The Ibex foot’s balanced performance gives amputees the confidence they need to meet life’s challenges head on.
Suggested L-Codes
L5980, L5986
Suggested L-Codes are provided as a reference only. It is the responsibility of the practitioner and/or patient care facility submitting this claim to determine and submit the correct coding within all established rules and guidelines.
Features
-
Durable foot for heavier users with outstanding enery return
-
Innovative micro-slice technology for multi-axial performance
-
Adjustable heel wedge for fine tuning heel stiffness
Featured Specifications
Functional Level
K2, K3, K4
Pyramid (mm)
XD 34
Mount
Ti Pyramid
Patient Weight Maximum
440 lbs. (200 kg)
Weight
21.2 oz. (602 g)
Build Height
7.3 in. (186 mm)
Ordering Information
Foot shell sold separately (see below). Fillauer recommends using only Ibex XD componentry for the Ibex XD foot. These are the only components that are fully compatible and warranted to ensure customer safety and overall product functionality (see below).
Warranty
-
3 years from date of patient fitting
-
60-day patient trial from date of patient fitting
-
Foot Shell: 6 months from date of patient fitting
The Ibex XD has been designed and manufactured for specific patient weights. Failure to follow the weight guidelines and/or overload conditions caused by the patient, such as heavy lifting, high impact sports, or abusive activities, that would otherwise damage the natural limb, may void the warranty. Fillauer recommends using only Ibex XD componentry for the Ibex XD foot. These are the only components that are fully compatible and warranted to ensure customer safety and overall product functionality.
Foot Shell
Resources
Stay up to date with new products and accessories.
XD Heavy Duty Tube Clamp Adapter for 34 mm Tube
| Weight Limit | Build Height | Weight | SKU | |
|---|---|---|---|---|
| XD Heavy Duty Tube Clamp Adapter for 34 mm Tube | 440 lbs. (200 kg) | 2.1 in. (53 mm) | 3 oz. (84 g) | 126100 |
XD Heavy Duty 34 mm Pylon Tube
| Weight Limit | Length | Diameter | SKU | |
|---|---|---|---|---|
| XD Heavy Duty 34 mm Pylon Tube | 440 lbs. (200 kg) | 16.9 in. (430 mm) | 34 mm | 126133 |
XD Heavy Duty 4-Prong Pyramid
| Weight Limit | Build Height | Weight | SKU | |
|---|---|---|---|---|
| XD Heavy Duty 4-Prong Pyramid | 440 lbs. (200 kg) | 0.7 in. (18 mm) | 4.6 oz. (131 g) | 126120 |
XD Heavy Duty 4-Prong Receiver
| Weight Limit | Build Height | Weight | SKU | |
|---|---|---|---|---|
| XD Heavy Duty 4-Prong Receiver | 0.75 in. (19 mm) | 3 oz. (87 g) | 126122 |