The Fillauer Myo/One Electrode System replaces cables, dummies, sealing rings and multiple devices with one simple cable.

The Fillauer Myo/One Electrode System replaces cables, dummies, sealing rings and multiple devices with one simple cable.

These FDA class II cleared electrodes feature a cutting-edge dome design that offers a confident triple sealing technology

Twenty-three grip patterns are available including 5 customizable grips. The Taska hand is compatible with all input devices, pattern recognition systems and elbows. A Taska 2000 mAh battery is included with charge port on/off switch, wall adapter and car charger.

Twenty-three grip patterns are available including 5 customizable grips. The Taska hand is compatible with all input devices, pattern recognition systems and elbows. A Taska 2000 mAh battery is included with charge port on/off switch, wall adapter and car charger.

COAPT Complete Control Pattern Recognition system

COAPT USB bluetooth dongle

Set of fabrication dummies for easier lamination of the COAPT system to the prosthesis

Multiple programmable grip patterns provide confident, compliant grasp of objects. The LP (low profile), direct to forearm lamination wrist, provides water-resistance and 90° of passive wrist rotation. Compliant wrist flexion with 3 locking positions is integrated into the system. The TASKA HandGen2 Kit comes with a 2000 mAh battery, magnetic charge port, wall adapter, car […]

Multiple programmable grip patterns provide confident grasp of objects. The industry standard Quick Disconnect wrist provides interchangeability with almost all in-hand controller terminal devices including the ETD and ETD2. Compliant wrist flexion with 3 locking positions is integrated in the system. The TASKA HandGen2 Kit comes with a 2000 mAh battery, magnetic charge port, wall […]

Complete the waterproof solution with the IP67 rated TASKA QD Lamination Collar and 6-band Coaxial Plug (shown in image). Also available with 4-band Coaxial Plug

When used with a Generation 2 Taska hand, the TASKA wrist lamination kit makes the quick disconnect waterproof. The prosthesis can now be submersed past the wrist to the first opening in the socket.4 Band Coaxial Plug for use with direct control applications (not for use with Pattern Recognition Systems).Not compatible with the Motion Control […]

Replacement seal to be used with the Taska Lamination Collar.

When used with a Generation 2 Taska hand, the waterproof seal makes the quick disconnect wrist waterproof. Must be used with a Motion Control End Cap. Compatable with the Motion Control Waterproof Collar for Quick Disconnect Wrist.

Maintenance kit for the Low Profile Taska Wrist. Contains a replacement O-ring, Set Screw, Lubricant and the appropriate Torx Screwdriver

A replacement lamination kit for the Taska Hand with the Low Profile Wrist. Contains a lamination collar, O-ring, Torx driver, set screw and lamination dummy plug.

For replacing the Switch Block supplied with Low Profile TASKA Hands to connect the power system to the EMG inputs and the TASKA Hand.

Charge the hand from anywhere with a wall plug. Package includes universal plug kit

Motion Control Utah Arm 3

Motion Control Utah Arm 3

Motion Control Utah Arm 3+

The Motion E2 Elbow is a small, lightweight electric elbow for use with smaller individuals or adolescents.

Order this option when fitting a COAPT pattern recognition system to a new (vs. existing) Utah Arm U3+. (To order with an ’existing’ Utah Arm U3+, order part number 3010891.) Once installed into a UtahArm U3+ this option cannot be removed, however, this modification does not rule out the use of the Utah Arm U3+ […]

The Motion Control ProControl 2 is a modular controller for use where precise, myoelectric control of hand or wrist is required. Inputs can be EMG (myoelectric), harness sensors, or touch pads. Choose from a wide range of battery options. Use Standard Terminal devices and wrist rotators.