Replacement Forearm for Utah Arms with ring connector and quick disconnect wrist.

Cannot be used with an Electric Wrist Rotator.

Laminated forearm prefabricated by Fillauer. Fits a corresponding Motion E2 Elbow in size. Compatible with MC wrist lamination collar, or others.

The External Cable Housing provides a way to secure extension cables to the humeral section and forearm, passing across the elbow joint of a Motion E2 Elbow. The kit contains two sizes of cable housing, two keeper brackets, and self-tapping screws.

Suggested for use with a Hybrid Elbow and multi-articulating hands, as those terminal devices utilize large amounts of battery life. May Require: Also must order Power Cord (Part No. 1390041B, US; or, Part No. 1390043B, Euro) at no charge. Call Motion Control, Inc. at 801-326-3434 for details.

To engage Hand/Wrist switching in the ProControl 2 system.

A ½ -20 stud replaces the Quick Disconnect on MC Terminal Devices. A common application would be Otto Bock Ball and Socket Wrist. Ordered in conjunction with a Motion Control Hand or ETD.

The Otto Bock Wrist Disarticulation Friction Wrist can be adapted to any MC terminal device to provide passive pronation/supanation of the wrist. The length of the terminal device, with this wrist unit is 1/2″ inch (13mm) longer than the wrist disarticulation version terminal devices, and 1/2″ (13mm) shorter than the Quick Disconnect version terminal devices.

Creates a water resistant cover over the wrist and forearm. Used with ETD only.

Creates a splash-resistant cover over the wrist and forearm. Used with ETD2 only.

The Otto Bock Wrist Disarticulation Friction Wrist can be adapted to any MC terminal device to provide passive pronation/supanation of the wrist. The length of the terminal device, with this wrist unit is 1/2″ inch (13mm) longer than the wrist disarticulation version terminal devices, and 1/2″ (13mm) shorter than the Quick Disconnect version terminal devices.

Flexible cover for Multi-flex wrist.

High Profile Bump Switch (3/4 inch, 2 cm tall) for hand/wrist switching when the U3, U3+ or Hybrid elbow is set up using A-version hand/wrist switching.

Pull switch for A-Version hand/wrist switching.

Low Profile Bump Switch (1/4 inch, 0.6 cm tall) for A-version hand/wrist switching.

High Profile Bump Switch (3/4 inch, 2 cm) for Remote Elbow Lock/Unlock in the U3, U3+ or Hybrid elbow.

Pull switch for elbow lock/unlock.

Low Profile Bump Switch (1/4 inch, 0.6 cm tall) for Remote Elbow Lock/Unlock in the U3, U3+ or Hybrid elbow.

High Profile Switch (3/4 inch, 2 cm tall) for remote on/off switching of the U3, U3+ or Hybrid elbow.