Allow TD attachment for weak, injured or paralyzed hands. Constructed of low temperature (150-180°), easily formable Exos Laminates. BOA® cable lacing tension and closure technology. One size, enlarges easily for entry and exit.

Allow TD attachment for weak, injured or paralyzed hands. Constructed of low temperature (150-180°), easily formable Exos Laminates. BOA® cable lacing tension and closure technology. One size, enlarges easily for entry and exit.

Stain resistant and waterproof. Custom colors available by special order at extra cost. Extra long tapered cones in two models.

The Black Iron Trainer Pivot, (BIT PIVOT) is an advanced, additional, version of the original BIT. The BIT is the world’s most popular weight training prosthetic accessory.

Grand Slam TDs provide for powerful, smooth, two-handed swings. Releases bat easily. Baseball and softball

Order this option when fitting a COAPT pattern recognition system to a new (vs. existing) Utah Arm U3+. (To order with an ’existing’ Utah Arm U3+, order part number 3010891.) Once installed into a UtahArm U3+ this option cannot be removed, however, this modification does not rule out the use of the Utah Arm U3+ […]

The Motion Control ProControl 2 is a modular controller for use where precise, myoelectric control of hand or wrist is required. Inputs can be EMG (myoelectric), harness sensors, or touch pads. Choose from a wide range of battery options. Use Standard Terminal devices and wrist rotators.

The Motion Control ProControl 2 is a modular controller for use where precise, myoelectric control of hand or wrist is required. Inputs can be EMG (myoelectric), harness sensors, or touch pads. Choose from a wide range of battery options. May Require: Wrist Feature (Part No. 4010000). Includes: Input device (choice of Triad Preamp, Linear Potentiometer, […]

Controller for ProControl 2. Does not include any input device, wire harness, or dummies. May Require: Wrist Feature (Part No. 4010000). Does NOT include: Input device (Triad Preamp, Linear Potentiometer, Force Sensor, Touch Pads), Lamination Dummy, or wire harness. Call Motion Control, Inc. at 801-326-3434 for details.

For Direct Lamination of the Terminal Device to the Forearm. (No Quick disconnect)

Force Limiting Auto Grasp. With FLAG engaged, pinch force is limited to approximately 2 lbs of pinch force. It is then pulsed up with a muscle contraction. Auto Grasp also tightens the grip if an inadvertent signal is sensed.

For Direct Lamination of the ETD2 Terminal Device to the Forearm. (No Quick disconnect)

Force Limiting Auto Grasp. With FLAG engaged, pinch force is limited to approximately 2 lbs of pinch force. It is then pulsed up with a muscle contraction. Auto Grasp also tightens the grip if an inadvertent signal is sensed.

Shortened Hand but retains Quick Disconnect.

For Direct Lamination of the Terminal Device to the Forearm. (No Quick disconnect)

Force Limiting Auto Grasp. With FLAG engaged, pinch force is limited to approximately 2 lbs of pinch force. It is then pulsed up with a muscle contraction. Auto Grasp also tightens the grip if an inadvertent signal is sensed.

Replaces aluminum index and middle fingers in the MC hand with Stainless Steel fingers.

Replacement Hooks for ETD. Must be installed by Motion Control. Labor not included.

For replacement of Titanium Hook fingers. Must be sent to Motion Control to insure proper alignment.

For replacement of Black anodized Hook fingers. Must be sent to Motion Control to insure proper alignment.

The Motion Control Flexion Wrist allows an ETD (Electric Terminal Device) to be moved and locked for optimal positioning while eating, driving, etc. A manual lever locks the Wrist in the neutral position or at 30 degrees of extension, or 26, and 52 degrees, of flexion.

The Motion Control Flexion Wrist allows an ETD (Electric Terminal Device) to be moved and locked for optimal positioning while eating, driving, etc. A manual lever locks the Wrist in the neutral position or at 30 degrees of extension, or 26, and 52 degrees, of flexion. This allows the motion to be Radia-Ulnar deviation (AB/AD-duction).

The Motion Control Flexion Wrist allows an ETD2 (second generation Electric Terminal Device) to be moved and locked for optimal positioning while eating, driving, etc. A manual lever locks the Wrist in the neutral position or at 30 degrees of extension, or 26, and 52 degrees, of flexion.

The Motion Control Flexion Wrist allows a Hand to be moved and locked at 30 degrees flexion and extension for optimal positioning while eating, driving, etc. A manual lever locks the Wrist in the neutral position or at 30 degrees of flexion or extension.