Replacement Forearm for the Utah Hybrid Arm with ring connector and quick disconnect wrist.

Cannot be used with an Electric Wrist Rotator.

Cannot be used with an Electric Wrist Rotator.

Increase the length of the U3, U3+ or Hybrid Elbow to longer than standard length. Inform Motion Control of exact length.

Laminated forearm prefabricated by Fillauer. Fits a corresponding Motion E2 Elbow in size. Compatible with MC wrist lamination collar, or others.

The External Cable Housing provides a way to secure extension cables to the humeral section and forearm, passing across the elbow joint of a Motion E2 Elbow. The kit contains two sizes of cable housing, two keeper brackets, and self-tapping screws.

Suggested for use with a Hybrid Elbow and multi-articulating hands, as those terminal devices utilize large amounts of battery life. May Require: Also must order Power Cord (Part No. 1390041B, US; or, Part No. 1390043B, Euro) at no charge. Call Motion Control, Inc. at 801-326-3434 for details.

Provides an additional 2 years to the standard 2-year warranty of the product.

To engage Hand/Wrist switching in the ProControl 2 system.

A ½ -20 stud replaces the Quick Disconnect on MC Terminal Devices. A common application would be Otto Bock Ball and Socket Wrist. Ordered in conjunction with a Motion Control Hand or ETD.

The Otto Bock Wrist Disarticulation Friction Wrist can be adapted to any MC terminal device to provide passive pronation/supanation of the wrist. The length of the terminal device, with this wrist unit is 1/2″ inch (13mm) longer than the wrist disarticulation version terminal devices, and 1/2″ (13mm) shorter than the Quick Disconnect version terminal devices.

Force Limiting Auto Grasp (FLAG) and Bluetooth upgrade to older TD. With FLAG engaged, pinch force is limited to approximately 2 lbs of pinch force. It is then pulsed up with a muscle contraction. Auto Grasp also tightens the grip if an inadvertent signal is sensed.

Creates a water resistant cover over the wrist and forearm. Used with ETD only.

Creates a splash-resistant cover over the wrist and forearm. Used with ETD2 only.

The Otto Bock Wrist Disarticulation Friction Wrist can be adapted to any MC terminal device to provide passive pronation/supanation of the wrist. The length of the terminal device, with this wrist unit is 1/2″ inch (13mm) longer than the wrist disarticulation version terminal devices, and 1/2″ (13mm) shorter than the Quick Disconnect version terminal devices.

Force Limiting Auto Grasp (FLAG) and Bluetooth upgrade to older TD. With FLAG engaged, pinch force is limited to approximately 2 lbs of pinch force. It is then pulsed up with a muscle contraction. Auto Grasp also tightens the grip if an inadvertent signal is sensed.

High Profile Bump Switch (3/4 inch, 2 cm tall) for hand/wrist switching when the U3, U3+ or Hybrid elbow is set up using A-version hand/wrist switching.

Pull switch for A-Version hand/wrist switching.

Low Profile Bump Switch (1/4 inch, 0.6 cm tall) for A-version hand/wrist switching.

High Profile Bump Switch (3/4 inch, 2 cm) for Remote Elbow Lock/Unlock in the U3, U3+ or Hybrid elbow.

Pull switch for elbow lock/unlock.

Low Profile Bump Switch (1/4 inch, 0.6 cm tall) for Remote Elbow Lock/Unlock in the U3, U3+ or Hybrid elbow.

High Profile Switch (3/4 inch, 2 cm tall) for remote on/off switching of the U3, U3+ or Hybrid elbow.