Charge the TASKA Hand on the go. For use in 12 – 24V car accessory sockets.

The Y-cable adapter allows the use of two Taska batteries in a transradial system for a total of 4,000 mAh of battery capacity.

Additional adapter for connecting to the TASKA Hand from a PC.

For use with the TASKA Battery and chargers

Additional 2000mAh battery to be used with the TASKA Power Switch.

For fabricating a prosthesis. Kit contains lamination dummies for both battery cells, Power Switch and a drill guide for the Power Switch (not shown).

Supplied as a set of 5 Grip Tips. Kit is supplied with a TASKA Screwdriver and screws.

High Profile Bump Switch (3/4 inch, 2 cm tall) for hand/wrist switching when the U3, U3+ or Hybrid elbow is set up using A-version hand/wrist switching.

No charge when ordered with Part No. 5010035, 5010036, 5010038, 5010039, 5010040, 5010041, 5010042, 5010043, 5010044. Items described as BDL- …, with Item Numbers having a ’B’ suffix, have reduced prices that are only available when purchased along with certain other items. Call Motion Control, Inc. at 801-326-3434 for details.

No charge when ordered with Part No. 5010035, 5010036, 5010038, 5010039, 5010040, 5010041, 5010042, 5010043, 5010044. Items described as BDL- …, with Item Numbers having a ’B’ suffix, have reduced prices that are only available when purchased along with certain other items. Call Motion Control, Inc. at 801-326-3434 for details.

No charge when ordered with Part No. 5010035, 5010036, 5010038, 5010039, 5010040, 5010041, 5010042, 5010043, 5010044. Items described as BDL- …, with Item Numbers having a ’B’ suffix, have reduced prices that are only available when purchased along with certain other items. Call Motion Control, Inc. at 801-326-3434 for details.

Multi-articulating Terminal Devices use a great deal of energy. The Battery Upgrade provides a power management system for the use of a secondary battery placed in the humeral section of the socket. If this battery should run out of power, the system automatically switches to the Utah Arm, replaceable, battery. Cannot be used with Remote […]

Allows the use of an external switch for turning a Utah Arm on and off. Useful for bilateral UE amputees. Requires a 5-wire harness and a switch. Cannot be used with iLimb/BeBionic external battery circuit.

Replacement case for the Utah Artificial Arm.

Replacement Forearm for Utah Arms with ring connector and quick disconnect wrist.