Motion Control Utah Arm 3

Motion Control Utah Arm 3

Motion Control Utah Arm 3+

The Hybrid Arm is lighter than a Utah Arm, but incorporates the same Hand/ETD control and lock/unlock features.

Multiple programmable grip patterns provide confident, compliant grasp of objects. The LP (low profile), direct to forearm lamination wrist, provides water-resistance and 90° of passive wrist rotation. Compliant wrist flexion with 3 locking positions is integrated into the system. The TASKA HandGen2 Kit comes with a 2000 mAh battery, magnetic charge port, wall adapter, car […]

Multiple programmable grip patterns provide confident grasp of objects. The industry standard Quick Disconnect wrist provides interchangeability with almost all in-hand controller terminal devices including the ETD and ETD2. Compliant wrist flexion with 3 locking positions is integrated in the system. The TASKA HandGen2 Kit comes with a 2000 mAh battery, magnetic charge port, wall […]

The Motion Control ETD (Electric Terminal Device) is rugged, functional and water resistant – the preferred choice of thousands of users. The MC Standard ETD can be used with all Motion Control elbow systems and ProControl 2. Flexion Wrist or Multi-flex Wrist options are available, as well as an optional MC Wrist Rotator.

The Motion Control (MC) Hand is made with high-strength, CNC machined fingers. It is wide opening and has a built-in safety release. The MC Hand serves as a useful tool for many tasks and lifestyles. Flexion Wrist or Multi-flex Wrist options are available, as well as an optional MC Wrist Rotator. The Standard Hand can […]

The Motion Control ETD (Electric Terminal Device) is rugged, functional and water resistant – the preferred choice of thousands of users. The MC ETD can be used with the Utah Arm, Hybrid Arm or ProControl 2 system. The ProPlus option features a controller inside the ETD allowing interchange with other manufacturers’ systems. Flexion Wrist or […]

The Motion Control ETD2 (second generation Electric Terminal Device) provides the same robust, functional and water resistance features of the original ETD in a shorter, sleeker package. A full 3 cm (1 1/8 inches) shorter than the ETD, the ETD2 is not only useful with long trans-radial amputation levels, it also closely matches the size […]

The Motion Control (MC) Hand is made with high-strength, CNC machined fingers. It is wide opening and has a built-in safety release. The MC Hand serves as a useful tool for many tasks and lifestyles. The ProPlus option features a controller inside the MC Hand allowing interchange with other manufacturers’ systems. Flexion Wrist or Multi-flex […]

The Motion Control Wrist Rotator mounts in the forearm of a Utah Arm, Hybrid Arm, or ProControl 2. It has 2 times the speed and torque of other Wrist Rotators. Available in tan, brown, or black.

The Motion Control Wrist Rotator mounts in the forearm. It has 2 times the speed and torque of other Wrist Rotators. The ProWrist version is designed for use with microprocessor-controlled terminal devices. The redesigned wire harness now allows for use of common 3 pin electrode cables and a 2 pin battery cable. Uses iOS User […]

The Motion Control Powered Flexion Wrist provides active wrist flexion and extension or active wrist radial/ulnar deviation. The device attaches via an industry standard quick disconnect. The corresponding hand is permanently attached to the distal end of the wrist. The controller in the PFW provides proportional control of flexion/extension, a pause at home feature and […]

The Motion E2 Elbow is a small, lightweight electric elbow for use with smaller individuals or adolescents.

Order this option when fitting a COAPT pattern recognition system to a new (vs. existing) Utah Arm U3+. (To order with an ‘existing’ Utah Arm U3+, order part number 3010891.) Once installed into a UtahArm U3+ this option cannot be removed, however, this modification does not rule out the use of the Utah Arm U3+ […]

The Motion Control ProControl 2 is a modular controller for use where precise, myoelectric control of hand or wrist is required. Inputs can be EMG (myoelectric), harness sensors, or touch pads. Choose from a wide range of battery options. Use Standard Terminal devices and wrist rotators.

The Motion Control ProControl 2 is a modular controller for use where precise, myoelectric control of hand or wrist is required. Inputs can be EMG (myoelectric), harness sensors, or touch pads. Choose from a wide range of battery options. May Require: Wrist Feature (Part No. 4010000). Includes: Input device (choice of Triad Preamp, Linear Potentiometer, […]

Controller for ProControl 2. Does not include any input device, wire harness, or dummies. May Require: Wrist Feature (Part No. 4010000). Does NOT include: Input device (Triad Preamp, Linear Potentiometer, Force Sensor, Touch Pads), Lamination Dummy, or wire harness. Call Motion Control, Inc. at 801-326-3434 for details.

For Direct Lamination of the Terminal Device to the Forearm. (No Quick disconnect)

Force Limiting Auto Grasp. With FLAG engaged, pinch force is limited to approximately 2 lbs of pinch force. It is then pulsed up with a muscle contraction. Auto Grasp also tightens the grip if an inadvertent signal is sensed.

For Direct Lamination of the ETD2 Terminal Device to the Forearm. (No Quick disconnect)

Force Limiting Auto Grasp. With FLAG engaged, pinch force is limited to approximately 2 lbs of pinch force. It is then pulsed up with a muscle contraction. Auto Grasp also tightens the grip if an inadvertent signal is sensed.

Shortened Hand but retains Quick Disconnect.